US HRC: Prices move up as 2020 availability shrinks
US hot-rolled coil (HRC) spot prices continued to rise this week as the amount of spot steel available to the market for the rest of 2020 continued to shrink and mills were able to collect higher prices.
The Argus weekly domestic US HRC assessment rose by $25/short ton (st) to $675/st ex-works Midwest, the highest price level since April 2019.
Lead times stayed steady at 8-10 weeks, with spot availability for December said to be low.
Steel Dynamics (SDI) was said to be the main steelmaker who hadn't opened their books for December yet. Integrated mills reportedly have little if any capacity to offer for the rest of the year, and are said to have told customers that their first quarter books are already partially full. One integrated steelmaker said they had been able to sell small amounts of HRC, around 100st, for $700/st.
Many market participants have noted delivery delays from steelmakers, whether integrated or electric arc furnace (EAF) minimills.
Prices have rallied by 50pc since hitting a yearly low of $450/st in mid-August, and many in the market now expect the higher prices to hold through the end of the year and into 2021. Skepticism on the strength of the current rally has been tempered by the continued strength of lead times.
Even the restart by Canadian integrated steelmaker Stelco after being idled for more than two months for upgrades and the pending startup of an expansion by Arkansas-based electric arc furnace (EAF) steelmaker Big River Steel will not drastically change the supply issues facing the market, participants have said.
The spread between #1 busheling scrap delivered US Midwest mills and HRC selling prices was $411.61/st, up by 6.5pc compared to the prior week. The spread is 41pc higher than the $291.57/st recorded a year ago.
The domestic US cold-rolled coil (CRC) assessment increased by $15/st to $860/st, while the hot-dipped galvanized (HDG) coil assessment increased by $30/st to $880/st. Lead times for CRC were flat at 11-12 weeks, while HDG lead times were flat at 12 weeks.
HRC import prices into Houston rose by $60/st to $680/st ddp, though there seems to be little appetite for imports given two to three month lead times.
Near term futures prices in the CME HRC futures market jumped this week, adding to increase from the prior week. December prices rose by $33/st to $660/st, while January HRC futures jumped by $35/st to $636/st. February prices increased by $32/st to $621/st, and March prices rose by $18/st to $601/st. April prices were up by $20/st to $601/st, while May futures prices were at $598/st.
Plate
The Argus weekly domestic US plate assessment increased by $10/st to $640/st and lead times were flat at 4-6 weeks. Both SSAB and ArcelorMittal pushed up $50/st price increases in the last week, but the moves are to try to keep pace with HRC price increases rather than being based on demand, according to plate market participants.
Related news posts
Hydro invests in metal recycling plant at Hoyanger
Hydro invests in metal recycling plant at Hoyanger
London, 22 April (Argus) — Norwegian aluminium producer Hydro has invested 240mn kroner ($21.8mn) in a new recycling facility alongside its primary aluminium smelter in Hoyanger, Norway. The recycling plant will process 36,000 t/yr of post-consumer aluminium scrap, as Hydro moves towards its 2030 target of reducing its emissions by 30pc compared with 2018 levels. The new facility will process scrap metal from vehicles, building facades, furniture, packaging and other consumer goods, which will be mixed with primary metal made with renewable hydropower at the Hoyanger plant. Among Hydro's low-carbon aluminium products is the Circal brand of aluminium, which is made with 75pc recycled content, and the Reduxa brand, which is made with renewable energy and generates emissions of less than 4kg CO2/kg aluminium produced. They are key to the company's emission reduction targets and ultimately reaching net zero by 2050. "Recycling is the fastest way to zero. With this new facility, we deliver on our strategy to increase recycling capacity in our efforts to decarbonise our own production processes and make products that the world needs for the green transition," the executive vice-president of Hydro's aluminium metal business, Eivind Kallevik, said. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Baltimore opens third temporary shipping channel
Baltimore opens third temporary shipping channel
New York, 22 April (Argus) — A third temporary shipping channel has opened at the Port of Baltimore to allow more vessel traffic around the collapsed Francis Scott Key Bridge. Located on the northeast side of the main channel, the new passage has a controlling depth of 20-ft, a 300-ft horizontal clearance, and a vertical clearance of 135-ft. When combined with two other temporary channels opened earlier this month the port should be able to handle "... approximately 15 percent of pre-collapse commercial activity," said David O'Connell, the federal on-scene coordinator. The main shipping channel of the Port of Baltimore — a key conduit for US vehicle imports and coal exports — is expected to be reopened by the end of May, the Maryland Port Administration said earlier this month. The bridge collapsed into the water late last month when the 116,851dwt container ship Dali lost power and crashed into one of its support columns. Salvage teams have been working ever since to remove debris from the water and containers from the ship in order to clear the main channel. By Stephen Cunningham Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
China's Lopal starts first Indonesian LFP battery plant
China's Lopal starts first Indonesian LFP battery plant
Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
International Graphite gets Western Australia funding
International Graphite gets Western Australia funding
Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more