Demand shift sends China iron ore lump premiums soaring
Seaborne iron ore lump premiums have surged by 86pc in the last week, supported by strong demand as Chinese steel output stays high heading into winter and the dwindling supply of low-cost pellet alternatives.
The Argus 62pc iron ore lump premium jumped by 3¢/dry metric tonne unit (dmtu) to 13¢/dmt unit cfr Qingdao yesterday and has almost doubled from 7¢/dmtu a week earlier. The premium is the extra cost for every 1pc Fe in lump over the underlying ICX 62pc fines index. Lump was priced at $146.55/dmt on an outright basis yesterday, while the ICX was at $137/dmt cfr Qingdao.
A Newman Blend Lump (NBL) cargo traded at 14.2¢/dmtu fob basis over a January 62pc fines index on the Corex platform yesterday, accelerating the uptrend.
Chinese port inventories of Indian pellet fell to minimal levels in late November, eliminating a low-cost alternative to Brazilian pellet that makes up the bulk of China's port stocks.
Total lump stocks at six northern China ports have fallen by a third to 11mn-12mn t this week from around 18mn t in mid-November, market participants said. Chinese lump demand rises in winter when pollution restrictions limit fines sintering.
Direct-charge supply tightness is part of an overall shortage in seaborne markets caused by lower Brazilian output and tight supply of steel that is drawing more global capacity back on line.
Brazilian mining firm Vale has cut its 2020 production guidance to 300mn-305mn t. Vale's production had been on pace to exceed 400mn t before it was hit by a January 2019 fatal dam accident, heavy rains and Covid-19 delays.
Blast furnace restarts in Europe and US are diverting iron ore concentrate and pellet supply from China.
"Iron ore lump demand at portside markets has improved as it is more cost-effective now compared with pellet, pushing up lump prices since mid-November," a north China-based mill manager said. Pilbara Blend Lump (PBL) traded at Yn975/wet metric tonne (wmt) yesterday, up by about 7-8pc from Yn900-910/wmt on 16 November, he said.
Soaring flat steel prices are giving iron ore prices margin room to move higher.
But portside lump premiums have lagged seaborne prices. Portside lump premiums on a Yn/wmt basis have followed seaborne trends, but on a Yn/dmt basis have only turned positive this week.
"Traders' speculative demand pushed up seaborne lump premiums along with limited liquidity of lump cargoes in the seaborne market," a Shanghai-based trader said. Mills hold long-term contracts for PBL, limiting supply for spot sales, he said.
"There is at least a Yn100/t loss for landing an iron ore lump cargo at port now, while there is about a Yn20-30/t profit for portside lump sales using earlier import costs," a Tangshan-based mill analyst said. Portside traders usually hedge in derivatives markets to ensure margins, he added.
But some participants are not that optimistic about the outlook for lump premiums.
"Seaborne lump premiums remain much higher than portside lump premiums. I do not think it will go sky high, as the high metallurgical coke price will cap the rise, and there are relatively high stocks at China ports," an east China trader said.
Related news posts
Hydro invests in metal recycling plant at Hoyanger
Hydro invests in metal recycling plant at Hoyanger
London, 22 April (Argus) — Norwegian aluminium producer Hydro has invested 240mn kroner ($21.8mn) in a new recycling facility alongside its primary aluminium smelter in Hoyanger, Norway. The recycling plant will process 36,000 t/yr of post-consumer aluminium scrap, as Hydro moves towards its 2030 target of reducing its emissions by 30pc compared with 2018 levels. The new facility will process scrap metal from vehicles, building facades, furniture, packaging and other consumer goods, which will be mixed with primary metal made with renewable hydropower at the Hoyanger plant. Among Hydro's low-carbon aluminium products is the Circal brand of aluminium, which is made with 75pc recycled content, and the Reduxa brand, which is made with renewable energy and generates emissions of less than 4kg CO2/kg aluminium produced. They are key to the company's emission reduction targets and ultimately reaching net zero by 2050. "Recycling is the fastest way to zero. With this new facility, we deliver on our strategy to increase recycling capacity in our efforts to decarbonise our own production processes and make products that the world needs for the green transition," the executive vice-president of Hydro's aluminium metal business, Eivind Kallevik, said. By Jethro Wookey Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Baltimore opens third temporary shipping channel
Baltimore opens third temporary shipping channel
New York, 22 April (Argus) — A third temporary shipping channel has opened at the Port of Baltimore to allow more vessel traffic around the collapsed Francis Scott Key Bridge. Located on the northeast side of the main channel, the new passage has a controlling depth of 20-ft, a 300-ft horizontal clearance, and a vertical clearance of 135-ft. When combined with two other temporary channels opened earlier this month the port should be able to handle "... approximately 15 percent of pre-collapse commercial activity," said David O'Connell, the federal on-scene coordinator. The main shipping channel of the Port of Baltimore — a key conduit for US vehicle imports and coal exports — is expected to be reopened by the end of May, the Maryland Port Administration said earlier this month. The bridge collapsed into the water late last month when the 116,851dwt container ship Dali lost power and crashed into one of its support columns. Salvage teams have been working ever since to remove debris from the water and containers from the ship in order to clear the main channel. By Stephen Cunningham Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
China's Lopal starts first Indonesian LFP battery plant
China's Lopal starts first Indonesian LFP battery plant
Beijing, 22 April (Argus) — Major Chinese lithium iron phosphate (LFP) producer Jiangsu Lopal Tech has launched production at the first phase of its Indonesia-based LFP production plant. The Indonesian plant is the first overseas LFP battery material production project with over 10,000 t/yr capacity that a Chinese company has invested in, Lopal said. Lopal's subsidiary Changzhou Liyuan New Energy Technology started building the first phase of the project in July last year, with a 30,000 t/yr output capacity for LFP battery material. The line started pilot production in March. The plant is located in the Kendal Industrial Park in Indonesia's Central Java province. The whole project has a designed capacity of 120,000 t/yr, with the second phase of 90,000 t/yr likely to start construction in the second half of this year. This project marks a milestone in China's investment in overseas battery feedstock resources, according to market participants. Most Indonesian projects that Chinese firms invest in are for primary materials or intermediates such as lithium salts, graphite, nickel matte, mixed hydroxide precipitate (MHP) and ferro-nickel including nickel pig iron. Lopal has been accelerating its investment in lithium-ion battery material production in the past few years. It is also building a 50,000 t/yr production line for LFP and a 100,000 t/yr plant for iron phosphate in the Shandong Heze Juancheng industrial park, in which another 80,000 t/yr iron phosphate project is located. Changzhou Liyuan on 18 April released its newly-developed 4th generation high compaction LFP cathode material S501, with 2.65g/cm³ of compaction. This has increased the battery's energy density and power load, said the company. LFP has taken up a bigger market share in the power battery market because of its lower manufacturing costs and safer performance. But one of its main disadvantages is shorter driving ranges on electric vehicles because of lower energy density. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
International Graphite gets Western Australia funding
International Graphite gets Western Australia funding
Singapore, 22 April (Argus) — Australia's International Graphite will receive fresh funding of A$6.5mn ($4.2mn) for its graphite project and plans in Western Australia's (WA) Collie from the state government. The Labor party-led government of premier Roger Cook will provide A$4.5mn to support the acceleration of International Graphite's pilot graphite micronising plant in Collie to "full scale", with A$2mn for its battery anode material facility feasibility study, the WA government said on 20 April. International Graphite in February wet commissioned its 200 t/yr graphite micronising plant, having obtained government approval for equipment installation late last year. The facility is a precursor to its planned 4,000 t/yr commercial micronising facility in Collie, which is expected to cost A$12.5mn and could begin construction by mid-2024, the firm said. It plans to build the operations over 18-24 months, the WA government said. The company last year signed an exclusive agreement for a lease related to its Collie graphite battery anode material facility. It is aiming to be the first fully integrated battery anode graphite processing firm in WA. International Graphite owns the Springdale graphite deposit near Hopetoun in WA, the second-largest known graphite deposit in the country. The deposit has a mineral resource estimate of 49.3mn t of 6.5pc total graphitic carbon, according to the firm on 12 September. The Australian federal government last year gave A$4.7mn to International Graphite through its Critical Minerals Development Programme grants. It received the first and second tranche of A$1.7mn and A$1.25mn last year. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more