Indian government urges steel industry to boost exports
The Indian steel industry is being urged by the government to increase exports and gain back some the lost market share for the rest of the 2022-23 fiscal year ending 31 March following the removal of export duties.
"I would urge [the steel industry] to get back the mojo, get back the numbers and let's for the next four months make an effort to pull up our socks and get back to significant exports, so that we can capture our market share," commerce and industry minister Piyush Goyal said at a conference organised by the Indian Steel Association (ISA) this week.
The export duties imposed in May were necessary to provide price stability for domestic infrastructure projects, with Goyal saying "it had done wonders".
The export duties, which were imposed in late May to curb inflation and increase the availability in the domestic market, increased Indian steel inventories by 20pc and sharply hit the margins of steel market participants in the first half of 2022-23, said ISA president and AM/NS India chief executive Dilip Oommen, adding Chinese exports in the Middle East increased by 22pc as India exited the market after the duties were imposed.
He called on the government to include the steel sector in the Remission of Duties and Taxes on Export Products scheme, to boost exports and encourage India to play a key role in the Make in India, Make for World initiative.
The minister asked the steel industry to support micro, small and medium enterprises and exporters of value-added engineering products, so that there is no "runaway rise in domestic steel prices and small manufacturers don't get hurt post the removal of export duties".
Making use of FTA
The Indian steel industry has also been asked to make use of a free trade agreement (FTA) with Australia that make coking coal imports duty free and also look at exporting steel, as the steel sector will be exempt from the 5pc duty in Australia.
The engagement on FTAs has focused on giving protection to the domestic steel industry, Goyal said. "Many of our FTAs do not have that provision and it's a ridiculous situation where other countries are exporting steel to India using the FTA. So both in the UAE and in Australia FTAs, we have gotten the melt and pour conditions so that only steel produced locally in those countries can be imported into India."
The country's per capita consumption of steel leaves a lot to be desired that is below world average, Goyal said, although there are huge opportunities in the Indian domestic market with the growing automobile and manufacturing industries.
He acknowledged the challenges with coking coal purchases and urged the industry to do significant research in the area and look for alternatives, so that the country will be self-sufficient and not dependent on two or three countries where prices for the key input is very high.
Goyal also encouraged the industry to work on green steel. "Whoever comes up with green steel faster, will probably have an edge in the international markets. I do believe India will have to engage with sustainability in a big way, so that Indian steel can get a priority over other countries, and we can really look to capture bigger and bigger markets and get value for the green steel and sustainably produced steel."
Related news posts
US Fed cuts rate by half point, signals more to come
US Fed cuts rate by half point, signals more to come
Houston, 18 September (Argus) — The US Federal Reserve cut its target interest rate by 50 basis points today, the first rate cut since 2020, with officials signaling they expect to make another half point worth of cuts by the end of 2024. The Fed's Federal Open Market Committee (FOMC) lowered the federal funds rate to 4.75-5pc from the prior range of 5.25-5.5pc, which was a two-decade high. The Fed had kept the target rate unchanged since July 2023 after hiking it for more than a year in the most aggressive increase campaign in four decades to quash inflation, which peaked at 9.1pc in mid-2022. "The committee has gained greater confidence that inflation is moving sustainably toward 2pc and judges that the risks to achieving its employment and inflation goals are roughly in balance," the FOMC said in its statement after the two-day meeting. "Job gains have slowed, and the unemployment rate has moved up but remains low." The Fed board and policymakers, in their latest economic projections, expect the target rate range will end 2024 near a midpoint of 4.4pc compared with an end of year midpoint of 5.1pc projected in June, which implies further cuts amounting to 50 basis points by the end of 2024. By Bob Willis Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Japan's Tokyo Steel cuts sales prices on weak demand
Japan's Tokyo Steel cuts sales prices on weak demand
Shanghai, 18 September (Argus) — Japan's steel manufacturing firm Tokyo Steel said it will cut domestic steel product prices for October, marking the first full-scale price cut in over four years. The decision was driven by sluggish domestic demand and increased competition from cheaper imported steel products. Tokyo Steel will reduce prices across all product lines starting October, with steel coils and plates dropping by ¥15,000/t, shaped beams by ¥12,000/t, and tubes and deformed bars by ¥10,000/t. The company had maintained stable domestic steel prices for an extended period on the back of the steadier domestic demand and market conditions compared to the more volatile overseas market. The last price cut for deformed bars was in July 2023. Steel sales in Japan were weak during the third quarter, impacted by rising procurement costs for materials, a shortage of construction capacity, and an influx of cheaper steel products from China in the seaborne market, market participants said. A decline in profitability pushed Japanese mills to cut production costs. From 11 July to 14 September, domestic scrap prices at Tokyo Steel's Utsunomiya plant dropped by ¥12,500/t, or 23.8pc. Market sentiment in Japan remains bearish due to economic uncertainty and the strengthening of the Japanese yen. The upcoming adjustments in US monetary policy could add further volatility to exchange rates. "We may see more corrections in the Japanese domestic market," a trade source said. Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
July EU HRC imports show 175,000t pullback
July EU HRC imports show 175,000t pullback
London, 17 September (Argus) — EU hot-rolled coil (HRC) imports surpassed 1.5mn t in July — a record high — as importers for the first time faced a cap to the ‘other countries' safeguard quota, which led some to purchase back-up material from other sources. More importantly, official figures show that around 175,000t were pulled back from customs clearing, likely all in Italy, after the initial quota numbers were made available in early July from Egypt, Vietnam, Japan and Taiwan. This leftover amount will likely all be custom-cleared in October, in addition to material that has arrived since July, as market participants expect importers to clear all of their HRC to avoid the risk of retroactive duties, potentially applicable from December. Imports from Taiwan, India, Turkey and Japan in July all surpassed the 200,000t mark each, with total imports from those four origins close to 900,000t, a sharp year-on-year increase. Vietnam saw volumes drop ( see table ), while South Korean imports fell by 75pc on the year to 40,379t and Serbian imports were down by 10pc to 37,437t. Hot-dipped galvanised (HDG) imports were at a record high, topping 750,000t in July, with nearly 30pc of the total from Vietnam. There has been concern in the market that the EU might start an investigation on Vietnamese HDG, as volumes have been on the increase, while suppliers are regularly the lowest-priced in the market. Plate imports were also at a record high, as EU producers are preparing to file for an investigation on some origins. Meanwhile, the increase in imports and the drop in EU demand has led producers to seek export outlets, with EU HRC exports rising on the year and on the month in July to nearly 230,000t, with the bulk going to the UK, US and Turkey. Downstream product exports also increased. By Lora Stoyanova and Colin Richardson July EU HRC imports t July y-o-y ±% Taiwan 227,892.8 8.2 India 225,558.6 134.8 Turkey 223,185.9 255.2 Japan 210,842.9 6.5 Egypt 158,625.7 31.9 Vietnam 144,202.0 -59.5 Ukraine 101,721.2 118.5 Australia 51,784.0 104.4 Saudi Arabia 40,594.8 -36.4 Total 1,565,744.2 9.1 — GTT Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
US to impose 25pc tariffs on Chinese critical minerals
US to impose 25pc tariffs on Chinese critical minerals
Houston, 13 September (Argus) — The US plans to impose 25pc tariffs on Chinese minerals including indium, tantalum, chromium, cobalt and tungsten, citing China's efforts to dominate global supply chains, according to the office of the US Trade Representative (USTR). The USTR determined not to exclude any critical minerals from the proposed Section 301 tariffs. The USTR said the concentration of mining and refining capacity of these minerals in China, as well as China's effort to dominate the global supply chains for these minerals, endangers US national security and clean energy goals. The Section 301 tariffs on indium, tantalum, chromium, cobalt, and tungsten will go into effect on 27 September. Tariffs on natural graphite and permanent magnets will go into effect on 1 January 2026. China is the leading producer and exporter of indium, producing an estimated 650t in 2023, about 66pc of the global total, according to the US Geological Survey (USGS). The US imported 219 metric tonnes (t) of unwrought indium in 2023, including 10t from China. So far in 2024 the country has imported 148t, of which 45t originated in China, according to data from the US Commerce Department. Indium is primarily used globally for its electric conductivity in a variety of screens including liquid crystal displays (LCDs) as well as fiber-optic cables and other technical components. US consumption is more focused around solders and specialty alloys. The US imports more tantalum powders, alloys, and metals from China than any other country. The US imported 321t of unwrought tantalum in 2023, including 132t from China and has imported 269t between January and July 2024, including 178t from China. Tantalum is primarily used in high-temperature alloys and capacitors. Although China accounted for only 3.3pc — 79t — of global 2023 mine production, the USGS estimated the country had a world-leading 240,000t of tantalum reserves. Chromium is primarily used in stainless and heat-resistant steels. China is the world's largest producer of ferrochromium and stainless steel. The US imported 103,034t of chromium ores and concentrates in 2023, including just 10t from China. Still, the US did import 9,302t of unwrought chrome metal from China so far in 2024, which accounted for 74pc of total volumes, and US reliance on China for the metal has increased since sanctions forced Russian supplies off the table. Although China does not mine a significant amount of cobalt, it is the world's leading cobalt refiner and consumer. The US imported 18t of cobalt ores and concentrates in 2023, including 11t from China, and imported 11t between January and July 2024, including 6t from China. The US imported 1.6mn contained kilograms (ckg) of tungsten carbides in 2023, including 906,000ckg from China and imported 1mn ckg between January and July 2024, including 491,000ckg from China. Tungsten is primarily used in carbide parts for construction, metalworking, mining, and drilling applications. Tungsten is also used in specialty steel fabrication as well as in electrodes, filaments, and wires for various electrical and electronic products. By Cole Sullivan Critical Mineral Tariffs metric tonnes, t HTS Code Resource Name Imports from China, 2023 Imports from China, 2024 through July 2605.00.00 Cobalt ores and concentrates 11 6 2610.00.00 Chromium ores and concentrates 10 52 2611.00.60 Tungsten concentrates 139 46 2825.90.30 Tungsten oxides 212 19 2841.80.00 Tungstates (wolframates) 0 0 2849.90.30 Tungsten Carbide* 906,375 491,371 8101.10.00 Tungsten, powders 0 0 8103.20.00 Tantalum, unwrought 132 178 8112.92.30 Indium, unwrought; powders 10 45 Source: US Commerce Department *unit of measure is kilograms contained Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.
Business intelligence reports
Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.
Learn more