Iskenderun scrap terminals undamaged: Correction

  • Market: Metals
  • 07/02/23

Corrects third para that says Iskenderun port authority has declared force majeure - Iskenderun port has closed but official force majeure declaration is yet to be confirmed

Turkey's port of Iskenderun is closed and steel mills in the region have halted operations following a deadly earthquake that struck southern Turkey on 6 February, but steelmakers have incurred little damage to their production facilities or port terminals.

Iskenderun port has been closed and there is a large fire burning at the port's container terminal. No vessels carrying bulk scrap cargoes are currently able to dock at Iskenderun to discharge and several have been tracked waiting outside of the port. Resources to tackle the container terminal fire are limited as emergency services are focused on rescue operations in the region. Manpower and port handling equipment such as cranes are being allocated to rescue and recovery efforts, which means that even when ships are able to dock in Iskenderun, they are likely to face delays in discharging.

Three Turkish steel plants residing inland in Osmaniye will have to evaluate over the coming days when trucks will be available to carry material from the port to the steel mill, and whether road access is feasible. Highways in the Hatay region close to Iskenderun have been closed off because of major destruction. The three other major Turkish steel plants in the region are located in close proximity to their terminals, so they do not have to evaluate logistics to such an extent.

Steelmaking operations in the region have halted because of disruption to natural gas supplies and other energy infrastructure, and because mills are focusing on securing the safety of their workforces. It is not clear how long these stoppages will persist.

For deep-sea scrap cargoes sold to Iskenderun that are currently under loading or on route, Turkish mills will again need to evaluate and communicate with suppliers on whether they have the necessary manpower, equipment and inland logistics to accept material on time.

There is strong potential for delays to cargoes that are under loading for February shipment. But because no Turkish steel mill in the region or steel terminal has been severely damaged, scrap shipments are currently not expected to be cancelled.

Argus tracked 10 deep-sea scrap cargo sales to Iskenderun mills for February shipment, totaling an estimated combined tonnage of 327,500t.

Growing clarity on the full extent of the devastation in southern Turkey has altered market expectations on the speed at which Iskenderun mills will return to normal operations. Scrap market participants that yesterday thought a recovery of manpower, equipment and logistics could take place within a week now expect significant disruption for several weeks at least. The destruction caused by the earthquake on inland logistics will dampen steel rebar demand in Iskenderun and the surrounding area for many days.

The local rebar market relies on the availability of trucks and roads, and heavy winter conditions are putting further pressure on the market. This, along with expected delays to scrap shipments, will limit demand for new scrap cargoes from southern Turkey even as conditions on the ground begin to improve.

Iskenderun steel mills have accounted for around 18pc of total scrap imports to Turkey since April last year, a figure that will be lower than expected by some market participants. Total crude steel production in Iskenderun does not fully reflect scrap consumption as one of the region's largest steel mills, Isdemir, is a blast furnace operation while other mills in the area purchase large volumes of steel slab and billet as feedstock.

The rest of the scrap-consuming Turkish steel complex has not been directly physically impacted by the earthquake. Marmara and Izmir mills will most likely limit new business this week in order to gauge how the disruption to Iskenderun will affect the market going forward, but their operations are set to continue as normal.


Sharelinkedin-sharetwitter-sharefacebook-shareemail-share

Related news posts

Argus illuminates the markets by putting a lens on the areas that matter most to you. The market news and commentary we publish reveals vital insights that enable you to make stronger, well-informed decisions. Explore a selection of news stories related to this one.

News
19/04/24

India mulls using more natural gas in steel sector

India mulls using more natural gas in steel sector

Mumbai, 19 April (Argus) — India's steel ministry is considering increasing natural gas consumption in the sector as it aims to lower carbon emissions from the industry. Steelmakers held a meeting with the steel ministry earlier this month, to discuss challenges and avenues to increase gas allocation to the sector, according to a government document seen by Argus . Steel producers requested that the government set gas prices at an affordable range of $7-8/mn Btu for them, to make their gas-based plants viable, as well as for a custom duty waiver on LNG procured for captive power. India's LNG imports attract a custom duty of 2.5pc. City gas distribution firms sell gas at market-determined prices to steel companies. Representatives from the steel industry also requested for the inclusion of gas under the purview of the country's goods and service tax, and to be given higher priority in the allocation of deepwater gas, which has a higher calorific value. Deepwater gas is currently deployed mostly to city gas distribution networks. Steelmakers are currently undertaking feasibility tests for gas pipeline connectivity at various steel plants. But a gas supply transmission agreement requires a minimum five-year period for investment approval. The steel industry is heavily reliant on coal, and the sector accounts for about 8-10pc of carbon emissions in the country. A task force of gas suppliers including IOC, Gail, BPCL, Shell, and HPCL and steel producers like Tata Steel, AMNS, All India Steel Re-roller Association and the Pellet Manufacturers Association has been set up, and the team is expected to submit a report on increasing natural gas usage and lowering carbon emissions by 15 May, the government document said. This team is one of the 13 task forces approved by the steel ministry to define the country's green steel roadmap. The steel ministry aims to increase green steel exports from the country in the light of the policies under the EU's Carbon Border Adjustment Mechanism (CBAM), which will take effect on 1 January 2026. Under the CBAM, importers will need to declare the quantity of goods imported into the EU in the preceding year and their corresponding greenhouse gas emissions. The importers will then have to surrender the corresponding number of CBAM certificates. CBAM certificate prices will be calculated based on the weekly average auction price of EU Emissions Trading System allowances, expressed in €/t of CO2 emitted. This is of higher importance to Indian steelmakers as the EU was the top finished steel export destination for Indian steelmakers during the April 2022-March 2023 fiscal year with total exports of 2.34mn t, and has been the preferred choice for Indian steel exports in the current fiscal year owing to higher prices compared to other regions. Indian steelmakers have started to take steps to lower their carbon emissions by announcing collaborations with technology companies to decarbonise, and are trial injecting hydrogen in blast furnaces, and increasing the usage of natural gas in ironmaking. By Rituparna Ghosh Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Read more
News

Australia’s Pilbara Mining sees continuing Li demand


19/04/24
News
19/04/24

Australia’s Pilbara Mining sees continuing Li demand

Singapore, 19 April (Argus) — Australian mining firm Pilbara Minerals' sees continuing lithium demand from its customers, while the firm continues to focus on cost optimisation. Pilbara in March accepted a pre-auction offer of $1,106/dry metric tonne (dmt) for 5,000dmt of 5.5pc-grade lithium concentrate (spodumene) cif China. The price equates to approximately $1,200/dmt 6pc-grade lithium concentrate (spodumene) cif China, said Pilbara, which reflects the "ongoing demand and positive pricing for unallocated production volume". "When you look at the past 60 days up to mid-April, the increases [in lithium prices] are fairly material," said the firm's managing director and chief executive Dale Henderson during the latest quarterly earnings call, adding that the recent uptick in lithium pricing is "comforting". Argus -assessed prices for 6pc-grade lithium concentrate (spodumene) held stable at $1,100-1,200/t cif China on 16 April from a week earlier, rebounding from an all-time low of $850-1,050/t on 27 February. But a standoff has more recently formed between spodumene producers and lithium refineries, with the former maintaining their offer prices and consumers rejecting them. Pilbara's spodumene realised price in January-March fell by 28pc on the quarter to $804/dry metric tonnes (dmt) cif China, despite the average grade of spodumene shipments rising by 0.1 percentage point to 5.3pc, which translates to $927/dmt for 6pc-grade lithium concentrate (spodumene). But the realised price during the quarter remained above its unit operating cost of $519/dmt cif China, which fell by 1pc on the quarter. Pilbara's ending cash balance came in at A$1.8bn ($1.15bn) as at 31 March, down from A$2.1bn a quarter earlier. Output Pilbara's output during January-March rose by 2pc on the quarter and by 21pc on the year to 179,000dmt. The output was propped up by a record monthly production of over 80,000dmt in March, partly because the P680 primary rejection facility reaching its nameplate production capacity in the second half of the quarter. But its chief operating officer Vince De Carolis said the peak performance should not be construed as an annualised run rate. The firm said it is not stockpiling its production volume as it sees "ongoing customer demand". Pilbara's spodumene sales volumes rose by 3pc on the quarter and by 14pc on the year to 165,121dmt for an average 5.3pc grade. Pilbara earlier in February defended its lithium downstream strategy and last month signed a binding agreement with Chinese refiner Ganfeng to carry out a joint feasibility study as they explore building a downstream conversion plant. The two firms are exploring building a lithium hydroxide and/or lithium carbonate conversion plant with 32,000 t/yr of lithium carbonate equivalent capacity, alongside a potential intermediate lithium chemical facility in the country. By Joseph Ho Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Coal sales at Australia’s Whitehaven fall in Jan-Mar


19/04/24
News
19/04/24

Coal sales at Australia’s Whitehaven fall in Jan-Mar

Sydney, 19 April (Argus) — Australian coal miner Whitehaven reported higher production but lower sales in January-March, with the firm increasing its percentage of high-grade thermal coal sales from the previous quarter. Saleable coal volumes rose by 8pc on the year to 3.9mn t but managed coal sales fell by 7pc to 3.8mn t compared to a year earlier. Sales were 83pc high-grade thermal, higher than 72pc in October-December and 68pc a year earlier. Whitehaven said run-of-mine production at Narrabri was below expectations because of the current panel's geological challenges, leading to reliability and maintenance problems with equipment. Whitehaven's overall sales guidance for the 2023-24 fiscal year remains unchanged at 16mn-17.5mn t for 2023-24 with a unit cost guidance, excluding royalties, of A$103-113/t ($66-$72/t) which the firm said is tracking at the top end. This is because of lower output from Narrabri, which is tracking below its output guidance of 5.1mn-5.7mn t for the fiscal year to 30 June. Whitehaven finalised takeovers of Australian-Japanese joint venture BHP Mitsubishi Alliance's (BMA) 12mn t/yr Blackwater and 4mn t/yr Daunia coking and thermal coal mine in Queensland on 2 April, with initial sales and production data to be reported in its April-June production report. The two mines are anticipated to deliver 4.5mn-5mn t run-of-mine output in April-June, with Whitehaven's revenue breakdown to be 70pc metallurgical and 30pc thermal on an annual basis post-acquisition as it seeks to pivot toward coking coal. Blackwater and Daunia contributed 10.11mn t and 4mn t respectively to BMA's total output in 2023. Whitehaven plans to sell down a 20pc stake in Blackwater to global steel producers, with a process presently underway. Whitehaven views the high calorific value (CV) thermal coal market as well supported in its key Asian markets, and said tightening of sanctions on Russian exporters is containing global supply. India's continuing growth is driving demand and underpinning price sentiment, Whitehaven said, despite a softening in metallurgical coal prices during the quarter . The Argus high-grade 6,000 kcal/kg NAR price averaged $126.74/t fob Newcastle and the 5,500 kcal/kg NAR coal price $93.85/t during January-March, compared with $134.23/t and $96.80/t respectively for October-December. By Tom Major Whitehaven quarterly results Jan-Mar '24 Oct-Dec '23 Jan-Mar '23 Volumes (mn t) Managed coal production 3.9 4.2 3.6 Managed coal sales 3.8 4.7 4.1 Managed coal stocks at period end 1 1.5 1.5 Coal sales mix (%) High-grade thermal coal 83 72 68 Other thermal coal 8 19 26 Metallurgical coal 9 9 6 Prices achieved ($/t) 136 142 280 Thermal coal 136 142 280 Metallurgical coal 213 166 234 Source: Whitehaven Australian coal price comparisons ($/t) Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

ISRI rebrands to ReMA, drops scrap from name


18/04/24
News
18/04/24

ISRI rebrands to ReMA, drops scrap from name

Las Vegas, 18 April (Argus) — The Institute of Scrap Recycling Industries (ISRI) has rebranded to the Recycled Materials Association (ReMA). The new name and rebrand better reflect the evolution within the recycling industry and its member companies, ReMA said at the group's annual convention and exposition in Las Vegas today. Washington, DC-based ReMA represents recycling industries including ferrous and nonferrous metals, electronics, glass, paper, plastics, textiles and tires and rubber. It is a member-driven trade organization that provides advocacy, education, safety and compliance training, and promotes public awareness of the vital role recycled materials play in the US economy, global trade, the environment and sustainable development. ISRI was formed in 1987 when the Institute of Scrap Iron and Steel merged with the National Association of Recycling Industries. Over the last 35 years, the association has seen tremendous growth in size and diversity of its membership, particularly in electronics, consumer brands and EV battery sectors. The trade association has around 1,700 member companies across the US and other 40 countries. By Brad MacAulay Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

News

Australia provides $256mn to high-purity alumina plant


17/04/24
News
17/04/24

Australia provides $256mn to high-purity alumina plant

Sydney, 17 April (Argus) — Australia's federal Labor government will offer A$400mn ($256mn) in loans to a high-purity alumina (HPA) processing facility, as part of its recently announced Future Made in Australia policy. Canberra has granted Australian developer Alpha HPA the funds via two separate agencies. The Northern Australian Infrastructure Facility and Export Finance Australia's (EFA) A$4bn critical minerals facility will each offer A$160mn and the two agencies will jointly fund a further A$80mn cost overrun facility, with drawdown on the grants contingent on Alpha HPA securing letters of intent for 10,000 t/yr in output. The announcement comes after the Queensland government provided A$21.7mn for the second stage of the facility at the industrial city of Gladstone in Queensland state. Australia's other HPA producer is Cadoux, formerly FYI Resources , is planning a 10,000 t/yr operation in Western Australia (WA) state's Kwinana industrial zone. The firm received an A$3mn grant from the WA government in November for an initial small-scale production plant. Graphite grant Canberra also brought forward an A$185mn EFA loan to Australian emerging graphite producer Renascor for stage 1 of its proposed vertically integrated battery anode material manufacturing project. A downstream graphite concentrator plant is planned for South Australia state with feedstock from the Siviour deposit, the largest outside Africa, Renascor said on 17 April. The original loan was approved in 2022, and Canberra said the concentrator project will now be realised sooner. Stage 2 will produce Australian-made purified spherical graphite for use in lithium-ion batteries required for electric vehicles and renewable technologies, Canberra said. Renascor is progressing advanced engineering designs for the mineral processing plant and non-process infrastructure while discussing binding offtake terms with existing partners, as well as with other battery-anode market participants. By Tom Major Send comments and request more information at feedback@argusmedia.com Copyright © 2024. Argus Media group . All rights reserved.

Business intelligence reports

Get concise, trustworthy and unbiased analysis of the latest trends and developments in oil and energy markets. These reports are specially created for decision makers who don’t have time to track markets day-by-day, minute-by-minute.

Learn more